Kawasaki ZX-14 Bar Risers.
1-3/4” Bar Risers
Limited Quantities.
Only have a few left.
More to come soon.
This kit will require an after market brake line. The stock brake line will be too short.
Some aftermarket brake lines may work fine. If you are ordering a new aftermarket brake line, order one 2” longer than a regular ZX-14 line to be safe.
Requires one hole to be drilled in right hand bar with drill bit included in the kit.
Complete installation instructions and hardware, everything needed less the after market brake line.
If you are not comfortable with drilling one hole, send me your bar with payment and I will drill it for you, no extra charge and send it back with the kit.
Complete kit consists of;
Two Riser Blocks.
One M6x20mm Hex Head Screw.
One 6mm Flat Washer.
One Reservoir Spacer.
Four M8 x 80mm Socket Head Cap Screws.
One Drill Jig.
One Drill Jig Alignment Pin.
One #18 Drill Bit.
Two Plastic Caps.
$149.00 plus shipping